 |
|
|
| |
 |
HARDPAVE paving
paint is a single pack water-based coating which cures into
a non-toxic film and offers a non-slip floor surface for a range
of applications, including a wide variety of floors, garden
paths, patios, and even some types of driveway. Other applications
include shower surrounds, platforms, walkways, ladders, etc.
HARDPAVE differs from EASYTREAD
in that it contains a very fine but hard anti-slip particle
which contributes to a tough wear-resistant finish. EASYTREAD
on the other hand, contains a resilient and compressible anti-slip
particle with a larger particle size. Both products are "ready
to use" and do not require the use of messy and time-consuming
grit spreading.
The products are also ideal for surfaces which may flex slightly
(such as wooden decking and floors) and can tolerate the presence
of water, including salt water.
HARDPAVE may also be used in hospitals and
retirement homes, etc. since no toxic or offensive fumes are
emitted and the products are quick drying. The coating is based
upon a high performance acrylic polymer emulsion which dries
to a firm and even film. The high molecular weight of the base
polymer contributes to the strong pigment binding power of the
coating, as well as providing an excellent toughness and durability,
combined with a superior adhesion to metals, fibreglass, concrete,
wood, etc. The product gives off no fumes or objectionable smells
and is pleasant and easy to use, even in confined spaces.
| SPECIAL FEATURES: |
| |
- Gives off no fumes
- Quick development of adhesion
- Water wash up (no solvents)
- Good resistance to abrasion
- Easy to roll on or brush
- Goes over any clean dry surface
|
|
- Wide range of colours
- Early water resistance
- No toxic fumes or solvents
- Can be recoated at any time if required
- Non toxic in the dry state
|
|
| HARDPAVE COLOUR CHART |
| |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Mission Brown |
Black |
Forest Green |
Light Terracotta |
Terracotta |
Ferric Red |
Beige |
Light Grey |
Sky Blue |
|
| PHYSICAL PROPERTIES: |
| |
| Pot Life: |
Indefinite |
| Specific Gravity: |
1.6 to 1.7 |
| Colours: |
Forest Green, Ferric Red, Mission Brown, Black,
Terracotta, Light Terracotta, Sky Blue, Beige, Light
Grey, White. (Other colours by request) |
| Pack Sizes: |
1 Litre, 4 Litre, 10 Litre. |
| Dilution: |
No water to be added (If it becomes too stiff,
stir in a small amount of WONDERCOAT in the same
colour) |
| Clean up: |
Water |
| Recoating
Times: |
Approx 1 - 2 hours (normal conditions, temperatures
above 25°C, sunlight, low humidity) |
| Coverage: |
2 coats of the HARDPAVE are recommended.
Subsequent coats usually spread further, but coverage
rates usually in range 3 to 4 square metres per
litre, due to the thickness of the paint film. |
| Delay
Before Use: |
Under normal conditions the coated floor area
may be walked on the following day. Full hardness
and resistance is reached after approximately 2
- 3 days from application. Keep vehicles off the
surface for 4 - 5 days, and for the first week thereafter,
park vehicles on the kerb to allow tyres to cool
before driving in. |
| PRODUCT
INFORMATION SHEET: |
| |
|
For your convenience we have provided as a download,
a PRODUCT INFORMATION SHEET in Adobe Acrobat format
below.
HARDPAVE.pdf
To view a PDF file you must have Adobe Acrobat
reader. It is free, and is available below.
Adobe Acrobat (4mb)
|
|
|
|
|
|
