 |
|
|
| |
 |
TUFFCOAT is a
water-based coating which cures into a hard clear non-toxic
film with excellent U.V. resistance, making it ideal as an exterior
floor coating. It is based upon not one but two high performance
acrylic polymer emulsions, including a urethane, which together
offer many impressive characteristics.
TUFFCOAT is cross-linked by the addition of
TUFFCOAT PART B which produces a clear film
with high gloss, hardness, wear resistance and good flexibility.
In addition, the cross-linking action gives rise to a vastly
improved resistance to chemicals, wear and abrasion.
It is not recommended to use the PART “A” liquid on its own
- the PART “B” hardener should always be added in the correct
ratio (see below). An interesting feature of the TUFFCOAT is
that, after 36 hours from adding the Part "B" hardener,
the mixture reverts back to a single pack system which thereby
avoids wasted mixes for large contract areas.
Warning: Although the TUFFCOAT itself is resistant
to U.V. radiation, it does not stop the U.V. from penetrating
the film and attacking the surface underneath. TUFFCOAT should
not be used on surfaces which are affected by U.V. e.g. timber
etc.
| SPECIAL FEATURES: |
| |
- Gives off no fumes
- Quick development of adhesion
- Water wash up (no solvents)
- Fair resistance to abrasion
- Easy to spray on or brush
- Goes over any clean dry surface
- Film not affected by UV
|
|
- Fair contact resistance to chemicals
- Can be recoated at any time if required
- Reverts back to single pack after 36 hours
- High spreading rate
- Non toxic in the dry state
|
|
| TYPICAL APPLICATIONS: |
| |
|
| TUFFCOAT sprayed
over urban brick pavers. |
|
|
|
| Close up of pedestrian precinct
area. |
|
|
| Exterior brick paved area, sealed with tuffcoat (2 pack) clear. |
|
|
|
| Close up of the pavers showing detail of the sealed surface. |
|
|
| PHYSICAL PROPERTIES: |
| |
| Shelf Life: |
Indefinite (if kept sealed in cool store away
from sunlight). |
| Pot Life: |
Upto 36 hours (when mixed). |
| Specific
Gravity: |
1.0 |
| Appearance: |
Milky-looking solution |
| Dilution: |
Must not be diluted |
| Clean up: |
Water |
| Recoating
Times: |
Approx 2-4 hours (normal conditions, temperatures
above 25°C, and low humidity) |
| Coverage: |
For most applications, 2 coats of the TUFFCOAT
will suffice. Subsequent coats usually spread further,
but coverage rates usually in range 8 to 10 square
metres per litre. |
| PRODUCT
INFORMATION SHEET: |
| |
|
For your convenience we have provided as a download,
a PRODUCT INFORMATION SHEET in Adobe Acrobat format
below.
TUFFCOAT.pdf
To view a PDF file you must have Adobe Acrobat
reader. It is free, and is available below.
Adobe Acrobat (4mb)
|
|
|
|
|
|
