Unit 1, 79 Forsyth Street
O’Connor, Western Australia 6163
ph: (08) 9314 2219
email: info@phoenixpaints.com.au

AboutContactOrderProductsDistributorsFAQLinksHome
 
Mayor Products: New Distributors Wanted
 

This product is a 50-50 mix of a high performance water-based epoxy and a hardener base, which when combined, provide an amazingly hard clear finish for use in many and varied applications including the sealing of a variety of floor surfaces.

These include materials such as most types of timber, tiles (unglazed in particular), concrete, Medium Density Fibreboard, and many others besides.  For very light surfaces (e.g. white or bleached pine), a slight colour change may be seen, but for all other surfaces there is no noticeable effect.  The finish can be recoated at any time in the future.   Phoenix FLOORGUARD (water-based protective polish) may be used from time to time, as an option to reduce wear and tear of the film.

Being an epoxy, DIAMONDCOAT is expected to offer a moderate chemical resistance to a range of household materials and solvents.

SPECIAL FEATURES:
 
  • Since DIAMONDCOAT is “acrylic” in nature, the films produced are not prone to cracking, chipping, or peeling.
  • Good resistance to hydrostatic pressure
  • Excellent adhesion promotion
  • Superior resistance to dirt pick-up
  • Water clean up
  • No expensive and highly dangerous solvents
  • Non-Flammable
  • Recoatability at any time
  • Exhibits an extremely hard,
    almost scratch proof finish.

TYPICAL APPLICATIONS:
DIAMONDCOAT shown on supermarket timber floor.
DIAMONDCOAT shown on supermarket aisle.

DIAMONDCOAT shown on supermarket floor.
 

PHYSICAL PROPERTIES:
 
Shelf Life: Indefinite
Pot Life: One Hour (when mixed).
Specific Gravity: 1.077/1.057
Gravity Mixture: 1.067
Mixing Ratio: 1:1 (By volume)
Application: Brush, Spray, or Applicator pad.
Dilution: Use DIAMONDCOAT Reducer
Clean up: Water
Recoating Times: 4 - 12 hours (depending on local conditions)
Colours: CLEAR
Pack Sizes: 2 Litre, 4 Litre, 10 Litre. (When mixed)
Coverage: 2 coats of the DIAMONDCOAT are recommended. Subsequent coats usually spread further, but coverage rates are typically in range 7 to 10 Square Metres per litre.


PRODUCT INFORMATION SHEET:
 


For your convenience we have provided as a download, a PRODUCT INFORMATION SHEET in Adobe Acrobat format below.

DIAMONDCOAT.pdf

To view a PDF file you must have Adobe Acrobat reader. It is free, and is available below.

Download Adobe Acrobat Reader
Adobe Acrobat (4mb)

 
 
     
Copyright Phoenix Paints © 2003 Designed by DD