TIMBERSTAIN is a Water-Based stain which is so advanced that its transparency allows the natural grain and texture of the timber to be enhanced without being obscured by the stain, even after two coats. It is ideal for application over porous timber, especially white woods such as pine, etc.

The coating, which is non-bleeding, non-migratory, and has a superior performance than dyes, also provides the ability to filter out hostile Ultra Violet radiation, which can otherwise damage timber and alter its colour.

TIMBERSTAIN, when used either as a furniture wiping stain or as an exterior transparent stain, adds protection, beauty and warmth to the natural features of wood. The coating is excellent for many applications, including wooden floors, general furniture, fences, sheds, greenhouses, sun decks, lawn furniture, and timber claddings, etc.

TIMBERSTAIN is made in a range of weather resistant timber colours, including Jarrah, Teak, Rosewood, and Mahogany, and these may be further inter-blended to produce an even wider range of colours. The product gives off no fumes or objectionable smells and is pleasant and easy to use, even in confined spaces. The products are quick drying, and all clean ups are carried out with water. TIMBERSTAIN may also be top coated with PHOENIX MAGNACOAT a water-based modified urethane dispersion, which is a hard wearing clear finish (although the TIMBERSTAIN must always be slightly abraded first to provide a surface key).However, if two or more coats of the TIMBERSTAIN have been applied, then in most cases an additonal clear top coats is not necessary.

SPECIAL FEATURES:

Supplied ready for use Range of pleasing colours Water Clean Up Can inter-blend to extend range Can be applied over many porous surfaces Full transparency of colour U. V. filtering action (protects the surface) No solvent odours Forms Non-Toxic films Non-Flammable Recoatability at any time Can be clear top-coated if required

TIMBERSTAIN RANGE:

One Coat   | Two Coats   One Coat   | Two Coats   One Coat   | Two Coats   One Coat   | Two Coats Rosewood Teak Mahogany Jarrah

TYPICAL APPLICATIONS:

Old weathered hardwood park bench, bleached by the sun after many years exposure. The same bench after three thin coats of Phoenix JARRAH TIMBERSTAIN.       Pine wine rack prior to staining.   Pine wine rack with two coats of JARRAH TIMBERSTAIN. Phoenix Paints "TIMBER STAIN" I am pleased to provide a testimonial for the above product which we have been using for more than four years. The reasons we use it are: 1. It looks good. We use the Mahogany Timber Stain on our Western Red Cedar weatherboards. The stain brings out a delicious golden-red hue that we really like, and the grain of the wood is still visible. We have had many people comment on how good our home 'feels" and we think a big part of that is due to the colour of the weatherboards. 2. It is easy to apply. It goes on quickly and it dries in about half an hour, so you can do a couple of coats in a day. 3. Itis environmentally friendly. This is important to us. Being a water based product we know we can use it and clean our brushes without impacting on our health or polluting the environment. 4. It lasts and is easy to maintain. We have had Timberstain on our north facing wall for more than four years. It needs a touch up coat now, but it has weathered well. The western and southern walls do not need recoating yet. When we apply a new coat to an area it does not make the older areas look worn. It blends in well. Weatherboard house 4 years after applying 2 coats of Mahogany Timberstain Weatherboard house 6 years after applying 2 coars of Mahogany Timberstain Also it doesn't go dark or black with mould as we have some timber boards do. We apply one coat on the back side to seal the wood and two coats on the front face. We recommend this product to any of our friends who are renovating or recladding their homes with Western Red Cedar weatherboards. We have just started some more renovations and will be using the Timberstain product again. Yours sincerely, Gary Burke

PHYSICAL PROPERTIES:

Pot Life: Indefinite Specific Gravity: 1.03 Colours: Jarrah, Teak, Mahogany and Rosewood Pack Sizes: 1 Litre, 4 Litre Dilution: Must not be diluted Clean up: Water Recoating Times: Approx 1-2 hours (normal conditions, temperatures above 25°C, sunlight, and low humidity) Coverage: 2-3 coats of the TIMBERSTAIN are recommended, in order to provide full protection against U.V. radiation. For interior surfaces, 1-2 coats usually suffice. Subsequent coats usually spread further, but coverage rates usually in range 8 to 10 square metres per litre. PRODUCT INFORMATION SHEET:   For your convenience we have provided as a download, a PRODUCT INFORMATION SHEET in Adobe Acrobat format below. TIMBERSTAIN.pdf To view a PDF file you must have Adobe Acrobat reader. It is free, and is available below. Adobe Acrobat (4mb)